1、为了提供良好的润滑，采用符合标准的油品，禁止使用劣质机油；
1. In order to provide good lubrication, the use of standard oil products is prohibited, and the use of inferior oil is prohibited.
2、对规定的监测点巡回检杏并认真填写运行记录；
2. To inspect apricots at the designated monitoring points and fill in the operation records carefully;
3、应随时注意和检查各压力表和温度表的读数是否在规定范围内；
3. Should always pay attention to and check whether the readings of pressure gauges and thermometers are within the prescribed range;
4、保持机身油池内和注油器中的润滑油位在规定的范围；
4. Keep the lubricating oil level in the fuselage oil pool and injector within the prescribed range;
5、检查注油器注油是否正常，检查润滑油向各个注油点的给送情况，如注油不正常，则应停止空压机运行并排除；===>完善的保养体系，也是厂商维系客户关系之根本
5. Check whether the oil injector is normal or not, and check the delivery of lubricant to each injection point. If the oil injection is not normal, the operation of air compressor should be stopped and eliminated; ===> Perfect maintenance system is also the basis for the manufacturers to maintain customer relations.
6、经常注意排气阀和吸气阀的工作状况是否正常并定期清洗；
6. Always pay attention to whether the exhaust valve and the suction valve work normally and clean regularly.
7、经常注意中间冷却器，储气罐上的阀状态是否完好可靠；
7. Always pay attention to the intermediate cooler, whether the safety valve on the gas tank is in good condition and reliable;
8、定期清洗或更换各过滤器机芯，定期更换润滑油；
8. Clean or replace the filter core regularly and replace the lubricating oil regularly.
9、中间冷却器冷凝出的油水应每二小时排放一次，储气罐每班排放一次，如空气中的湿度较大，应增加排放次数；
9. The oil and water from the intermediate cooler should be discharged every two hours, and the gas storage tank should be discharged every shift. If the humidity in the air is high, the number of discharges should be increased.
10、定期检查防护装置；
10. Regular inspection of safety protection devices;
11、停车后切断电源，关闭冷却水阀。
11. Cut off the power supply after stopping and close the cooling water valve.
The highlights of this article come from: Jinan Air Compressor for more details, please click on our official website: http://www.jnkbjx.com. Thank you for coming.
