济南科邦机械设备有限公司您身边的济南空压机厂家!
17553037111   18765879198

首页>企业新闻
空压机减速器的结构及转配要求
Time:2019-04-19 14:38:29       来源:http://www.jnkbjx.com/      

空压机减速器的一种结构方式,为蜗轮与锥齿轮减速器,它的特性是在外廓尺寸不大的情况下,可以获得较大的传动比,工作平稳,噪声较小。

A kind of structure of air compressor reducer is worm wheel and bevel gear reducer. Its characteristic is that it can get larger transmission ratio, work smoothly and have less noise when the outer dimension is small.
由于它采用下装蜗杆结构,因此啮合部位的润滑和冷却条件均较好,同时蜗杆轴承的润滑也便当。
Because of its lower worm structure, the lubrication and cooling conditions of meshing parts are better, and the lubrication of worm bearings is convenient.
空压机减速器
Air compressor reducer
2.空压机减速器的装配技术恳求
2. Appeal for Assembly Technology of Air Compressor Reducer
空压机减速器装配后应抵达下列恳求:
After assembling the air compressor reducer, the following appeals shall be reached:
(1).零件和组件必需正确安装在规则的位置,不得装人图样未规则的垫圈、衬套之类的零件。却强,範动其苏默发了确鲜行
(1) Parts and components must be installed correctly in regular positions, and parts such as gaskets and bushings with irregular patterns shall not be installed. But strong, Fan Moqi Sumo made it really rare.
2).固定联接件必需保证将零件或组件坚固地联接在一同。
2. Fixed connectors must ensure that parts or components are firmly joined together.
3).旋转机构必需灵活转动,轴承间隙适合、润滑良好,润滑油不得有渗漏现象。
3. The rotating mechanism must rotate flexibly. The bearing clearance is suitable and the lubrication is good. The lubricating oil must not leak.
4).各轴线之间有正确的相对位置。
4. There is a correct relative position between the axes.
济南空压机
5).齿轮副、圆锥齿轮副的啮合必需契合技术恳求。针零到我和目南首由装配的主要工作是: 零件的清洗,整形和补充
5. The meshing of gear pair and bevel gear pair must meet the technical requirements. The main work of assembly from needle Zero to my target is cleaning, shaping and supplementing parts.
3.空压机减速器的装配工艺过程加工,零件预装、组装、总装、调整等。
3. The assembly process of air compressor reducer, parts pre-assembly, assembly, assembly, adjustment and so on.
(1).零件的清洗、整形和补充加工
(1) Cleaning, shaping and supplementary processing of parts
1).零件的清洗,主要是肃清零件表面的防锈油、灰尘、切屑等污物。
1. The cleaning of parts is mainly to remove rust-proof oil, dust, chips and other contaminants on the surface of parts.
2).零件的整形,主要是修锉、錾削箱盖、门、轴承盖等铸件别离部位外形的错位,同时修锉零件上的锐角、毛刺和因碰撞而产生的印痕。这项工作常常谷界我想工确易被忽视而影响到装配的外观质量。
2. The shaping of the parts is mainly the dislocation of the casting parts such as the file, the box cover, the door and the bearing cover, which are separated from the shape of the parts. At the same time, the sharp angles, burrs and the marks caused by the collision of the parts are repaired. This work is often neglected and affects the appearance quality of assembly.
3).零件上的某些部位需求在装配时中止补充加工,例如对箱体与箱盖、轴承盖与箱体等联接螺孔中止配钻和攻螺纹等。
3. Some parts of the parts need to stop supplementary processing during assembly, such as stopping drilling and tapping threads for connecting holes between box body and box cover, bearing cover and box body, etc.
(2).零件的预装有些相配零件应先试装,待配合抵达恳求后再拆下。有时还要中止刮削、修锉等工作。
(2) Pre-assembly of parts. Some matching parts should be tried-assembled before they are disassembled. Sometimes the work of scraping and repairing files has to be stopped.
(3).组件的装配分析
(3) Assembly analysis of components
蜗杆轴、蜗轮轴和锥齿轮轴及其轴上有关零件,固然它们是独立的三个部分,但从装配的角度看,除锥齿轮组件外,其他两根轴及其轴上一切的零件,都不能单独中止装配。
Worm shaft, worm wheel shaft, bevel gear shaft and their related parts on the shaft, although they are independent of three parts, but from the point of view of assembly, except bevel gear components, the other two shafts and all parts on the shaft, can not stop assembly alone.
本文的精彩内容由济南空压机提供知识提供,本网站还有很多的精彩内容,更多的内容您可以点击进入:http://www.jnkbjx.com 我们有专门的客服为您解答问题
The wonderful content of this article is provided by Jinan Air Compressor. There are many wonderful contents on this website. You can click on more content to enter: http://www.jnkbjx.com. We have a special customer service to answer your questions.

电话:0531-85963300      手机:17553037111   18765879198    地址:济南市天桥区无影山中路130号重汽彩世界     备案号:鲁ICP备18021911号-1

济南科邦机械设备有限公司 济南科邦机械主营::济南空压机及配件 网址:http://www.jnkbjx.com     

鲁公网安备 37010502001004号